Blogs
Do you have a source for calibrated, traceable transmission filters?
Posted on by Ganesh Ramanathan
HunterLab does not supply glass or plastic filter transmission standards but here are some sources.
Can you provide instructions to replace the Instrument White Tile?
Posted on by Ganesh Ramanathan
Instructions for Replacing the White Tile on your HunterLab Instrument When purchasing a replacement white tile you will receive a CD that accompanies your new tile. This CD will list your instrument model and serial number.
How can I change the Green Tile Values in EasyMatch QC?
Posted on by Ganesh Ramanathan
My green tile values are not correct in the EasyMatch QC software. How can I change them? To edit the existing green tile values for your instrument in EasyMatch QC go to Sensor/ Diagnostics/ Green Tile Test. An EasyMatch QC window will open that prompts you to install the standard port plate. (The standard port […]
How can I change the Decimal Places displayed in EZMQC?
Posted on by Ganesh Ramanathan
FAQ: “I want to be able to change the display in EasyMatch QC to show only 1 decimal place. How do I do this?”
Do HunterLab sphere instruments conform to ASTM D1003?
Posted on by Ganesh Ramanathan
Yes, but note there are two different approved instrument geometries cited in the ASTM 1003 method.
What Fuse Protection is in place with HunterLab Instruments?
Posted on by Ganesh Ramanathan
All HunterLab instruments have fuses built into the main circuitry to protect the instrument against unusual and unexpected changes in voltage that could damage the electrical components.
Can Power Supplies in HunterLab Instruments be used everywhere?
Posted on by Ganesh Ramanathan
FAQ: “We need to take our LabScan XE instrument to Germany for some plant trial testing. Our machine is a US spectrophotometer 110v unit and, obviously, the power supply in Germany is 220v. The label on the back of the instrument says ‘110v-220v’, which sounds a little ambiguous to me. Do we need a voltage […]
How do I perform a “power on self test” with my LabScan XE?
Posted on by Ganesh Ramanathan
FAQ: “How do I perform a “power on self test” with my LabScan XE?”
How do I read a Standard and Sample in EasyMatch QC?
Posted on by Ganesh Ramanathan
FAQ: “How do I read a Standard and Sample in the EasyMatch QC software?”